Commit 3a746d01 authored by Skia's avatar Skia
Browse files

Finish the report

parent 13461268
......@@ -38,20 +38,20 @@ PROJECT_NAME = Sith
# could be handy for archiving the generated documentation or if some version
# control system is used.
PROJECT_NUMBER =
PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer a
# quick idea about the purpose of the project. Keep the description short.
PROJECT_BRIEF =
PROJECT_BRIEF =
# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
# the documentation. The maximum height of the logo should not exceed 55 pixels
# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
# to the output directory.
PROJECT_LOGO =
PROJECT_LOGO =
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
# into which the generated documentation will be written. If a relative path is
......@@ -154,7 +154,7 @@ FULL_PATH_NAMES = YES
# will be relative from the directory where doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
STRIP_FROM_PATH =
STRIP_FROM_PATH =
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
# path mentioned in the documentation of a class, which tells the reader which
......@@ -163,7 +163,7 @@ STRIP_FROM_PATH =
# specify the list of include paths that are normally passed to the compiler
# using the -I flag.
STRIP_FROM_INC_PATH =
STRIP_FROM_INC_PATH =
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
# less readable) file names. This can be useful is your file systems doesn't
......@@ -230,13 +230,13 @@ TAB_SIZE = 4
# "Side Effects:". You can put \n's in the value part of an alias to insert
# newlines.
ALIASES =
ALIASES =
# This tag can be used to specify a number of word-keyword mappings (TCL only).
# A mapping has the form "name=value". For example adding "class=itcl::class"
# will allow you to use the command class in the itcl::class meaning.
TCL_SUBST =
TCL_SUBST =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C. For
......@@ -280,7 +280,7 @@ OPTIMIZE_OUTPUT_VHDL = NO
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
# the files are not read by doxygen.
EXTENSION_MAPPING =
EXTENSION_MAPPING =
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
# according to the Markdown format, which allows for more readable
......@@ -616,7 +616,7 @@ GENERATE_DEPRECATEDLIST= YES
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
# ... \endcond blocks.
ENABLED_SECTIONS =
ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
# initial value of a variable or macro / define can have for it to appear in the
......@@ -658,7 +658,7 @@ SHOW_NAMESPACES = YES
# by doxygen. Whatever the program writes to standard output is used as the file
# version. For an example see the documentation.
FILE_VERSION_FILTER =
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
# by doxygen. The layout file controls the global structure of the generated
......@@ -671,7 +671,7 @@ FILE_VERSION_FILTER =
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
# tag is left empty.
LAYOUT_FILE =
LAYOUT_FILE =
# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
# the reference definitions. This must be a list of .bib files. The .bib
......@@ -682,7 +682,7 @@ LAYOUT_FILE =
# search path. Do not use file names with spaces, bibtex cannot handle them. See
# also \cite for info how to create references.
CITE_BIB_FILES =
CITE_BIB_FILES =
#---------------------------------------------------------------------------
# Configuration options related to warning and progress messages
......@@ -741,7 +741,7 @@ WARN_FORMAT = "$file:$line: $text"
# messages should be written. If left blank the output is written to standard
# error (stderr).
WARN_LOGFILE =
WARN_LOGFILE =
#---------------------------------------------------------------------------
# Configuration options related to the input files
......@@ -792,7 +792,7 @@ RECURSIVE = YES
# Note that relative paths are relative to the directory from which doxygen is
# run.
EXCLUDE =
EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
......@@ -809,7 +809,8 @@ EXCLUDE_SYMLINKS = NO
# exclude all test directories for example use the pattern */test/*
EXCLUDE_PATTERNS = */migrations/* \
*/admin.py
*/admin.py \
*env_sith/*
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
......@@ -820,13 +821,13 @@ EXCLUDE_PATTERNS = */migrations/* \
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories use the pattern */test/*
EXCLUDE_SYMBOLS =
EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or directories
# that contain example code fragments that are included (see the \include
# command).
EXAMPLE_PATH =
EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
......@@ -846,7 +847,7 @@ EXAMPLE_RECURSIVE = NO
# that contain images that are to be included in the documentation (see the
# \image command).
IMAGE_PATH =
IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
......@@ -863,7 +864,7 @@ IMAGE_PATH =
# code is scanned, but not when the output code is generated. If lines are added
# or removed, the anchors will not be placed correctly.
INPUT_FILTER =
INPUT_FILTER =
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis. Doxygen will compare the file name with each pattern and apply the
......@@ -872,7 +873,7 @@ INPUT_FILTER =
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
# patterns match the file name, INPUT_FILTER is applied.
FILTER_PATTERNS =
FILTER_PATTERNS =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER ) will also be used to filter the input files that are used for
......@@ -887,14 +888,14 @@ FILTER_SOURCE_FILES = NO
# *.ext= (so without naming a filter).
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
FILTER_SOURCE_PATTERNS =
FILTER_SOURCE_PATTERNS =
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
# and want to reuse the introduction page also for the doxygen output.
USE_MDFILE_AS_MAINPAGE =
USE_MDFILE_AS_MAINPAGE =
#---------------------------------------------------------------------------
# Configuration options related to source browsing
......@@ -1006,7 +1007,7 @@ COLS_IN_ALPHA_INDEX = 5
# while generating the index headers.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
IGNORE_PREFIX =
IGNORE_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the HTML output
......@@ -1050,7 +1051,7 @@ HTML_FILE_EXTENSION = .html
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_HEADER =
HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
# generated HTML page. If the tag is left blank doxygen will generate a standard
......@@ -1060,7 +1061,7 @@ HTML_HEADER =
# that doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_FOOTER =
HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
......@@ -1072,7 +1073,7 @@ HTML_FOOTER =
# obsolete.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_STYLESHEET =
HTML_STYLESHEET =
# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
# defined cascading style sheet that is included after the standard style sheets
......@@ -1083,7 +1084,7 @@ HTML_STYLESHEET =
# see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_STYLESHEET =
HTML_EXTRA_STYLESHEET =
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
......@@ -1093,7 +1094,7 @@ HTML_EXTRA_STYLESHEET =
# files will be copied as-is; there are no commands or markers available.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_FILES =
HTML_EXTRA_FILES =
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the stylesheet and background images according to
......@@ -1221,7 +1222,7 @@ GENERATE_HTMLHELP = NO
# written to the html output directory.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
CHM_FILE =
CHM_FILE =
# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler ( hhc.exe). If non-empty
......@@ -1229,7 +1230,7 @@ CHM_FILE =
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
HHC_LOCATION =
HHC_LOCATION =
# The GENERATE_CHI flag controls if a separate .chi index file is generated (
# YES) or that it should be included in the master .chm file ( NO).
......@@ -1242,7 +1243,7 @@ GENERATE_CHI = NO
# and project file content.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
CHM_INDEX_ENCODING =
CHM_INDEX_ENCODING =
# The BINARY_TOC flag controls whether a binary table of contents is generated (
# YES) or a normal table of contents ( NO) in the .chm file.
......@@ -1272,7 +1273,7 @@ GENERATE_QHP = NO
# the HTML output folder.
# This tag requires that the tag GENERATE_QHP is set to YES.
QCH_FILE =
QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
......@@ -1297,7 +1298,7 @@ QHP_VIRTUAL_FOLDER = doc
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_NAME =
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project / Custom
......@@ -1305,21 +1306,21 @@ QHP_CUST_FILTER_NAME =
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_ATTRS =
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's filter section matches. Qt Help Project / Filter Attributes (see:
# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_SECT_FILTER_ATTRS =
QHP_SECT_FILTER_ATTRS =
# The QHG_LOCATION tag can be used to specify the location of Qt's
# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
# generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
QHG_LOCATION =
QHG_LOCATION =
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
# generated, together with the HTML files, they form an Eclipse help plugin. To
......@@ -1452,7 +1453,7 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_EXTENSIONS =
MATHJAX_EXTENSIONS =
# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
# of code that will be used on startup of the MathJax code. See the MathJax site
......@@ -1460,7 +1461,7 @@ MATHJAX_EXTENSIONS =
# example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_CODEFILE =
MATHJAX_CODEFILE =
# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
# the HTML output. The underlying search engine uses javascript and DHTML and
......@@ -1520,7 +1521,7 @@ EXTERNAL_SEARCH = NO
# Searching" for details.
# This tag requires that the tag SEARCHENGINE is set to YES.
SEARCHENGINE_URL =
SEARCHENGINE_URL =
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
# search data is written to a file for indexing by an external tool. With the
......@@ -1536,7 +1537,7 @@ SEARCHDATA_FILE = searchdata.xml
# projects and redirect the results back to the right project.
# This tag requires that the tag SEARCHENGINE is set to YES.
EXTERNAL_SEARCH_ID =
EXTERNAL_SEARCH_ID =
# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
# projects other than the one defined by this configuration file, but that are
......@@ -1546,7 +1547,7 @@ EXTERNAL_SEARCH_ID =
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
# This tag requires that the tag SEARCHENGINE is set to YES.
EXTRA_SEARCH_MAPPINGS =
EXTRA_SEARCH_MAPPINGS =
#---------------------------------------------------------------------------
# Configuration options related to the LaTeX output
......@@ -1607,7 +1608,7 @@ PAPER_TYPE = a4
# If left blank no extra packages will be included.
# This tag requires that the tag GENERATE_LATEX is set to YES.
EXTRA_PACKAGES =
EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
# generated LaTeX document. The header should contain everything until the first
......@@ -1623,7 +1624,7 @@ EXTRA_PACKAGES =
# PROJECT_NAME), or the project number (see PROJECT_NUMBER).
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_HEADER =
LATEX_HEADER =
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
# generated LaTeX document. The footer should contain everything after the last
......@@ -1632,7 +1633,7 @@ LATEX_HEADER =
# Note: Only use a user-defined footer if you know what you are doing!
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_FOOTER =
LATEX_FOOTER =
# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the LATEX_OUTPUT output
......@@ -1640,7 +1641,7 @@ LATEX_FOOTER =
# markers available.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_EXTRA_FILES =
LATEX_EXTRA_FILES =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
......@@ -1740,14 +1741,14 @@ RTF_HYPERLINKS = NO
# default style sheet that doxygen normally uses.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_STYLESHEET_FILE =
RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an RTF document. Syntax is
# similar to doxygen's config file. A template extensions file can be generated
# using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_EXTENSIONS_FILE =
RTF_EXTENSIONS_FILE =
#---------------------------------------------------------------------------
# Configuration options related to the man page output
......@@ -1808,13 +1809,13 @@ XML_OUTPUT = xml
# validating XML parser to check the syntax of the XML files.
# This tag requires that the tag GENERATE_XML is set to YES.
XML_SCHEMA =
XML_SCHEMA =
# The XML_DTD tag can be used to specify a XML DTD, which can be used by a
# validating XML parser to check the syntax of the XML files.
# This tag requires that the tag GENERATE_XML is set to YES.
XML_DTD =
XML_DTD =
# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
# listings (including syntax highlighting and cross-referencing information) to
......@@ -1891,7 +1892,7 @@ PERLMOD_PRETTY = YES
# overwrite each other's variables.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
PERLMOD_MAKEVAR_PREFIX =
PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
......@@ -1932,7 +1933,7 @@ SEARCH_INCLUDES = YES
# preprocessor.
# This tag requires that the tag SEARCH_INCLUDES is set to YES.
INCLUDE_PATH =
INCLUDE_PATH =
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the
......@@ -1940,7 +1941,7 @@ INCLUDE_PATH =
# used.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
INCLUDE_FILE_PATTERNS =
INCLUDE_FILE_PATTERNS =
# The PREDEFINED tag can be used to specify one or more macro names that are
# defined before the preprocessor is started (similar to the -D option of e.g.
......@@ -1950,7 +1951,7 @@ INCLUDE_FILE_PATTERNS =
# recursively expanded use the := operator instead of the = operator.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
PREDEFINED =
PREDEFINED =
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
# tag can be used to specify a list of macro names that should be expanded. The
......@@ -1959,7 +1960,7 @@ PREDEFINED =
# definition found in the source code.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
EXPAND_AS_DEFINED =
EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
# remove all refrences to function-like macros that are alone on a line, have an
......@@ -1988,13 +1989,13 @@ SKIP_FUNCTION_MACROS = YES
# the path). If a tag file is not located in the directory in which doxygen is
# run, you must also specify the path to the tagfile here.
TAGFILES =
TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
# tag file that is based on the input files it reads. See section "Linking to
# external documentation" for more information about the usage of tag files.
GENERATE_TAGFILE =
GENERATE_TAGFILE =
# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
# class index. If set to NO only the inherited external classes will be listed.
......@@ -2042,14 +2043,14 @@ CLASS_DIAGRAMS = YES
# the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path.
MSCGEN_PATH =
MSCGEN_PATH =
# You can include diagrams made with dia in doxygen documentation. Doxygen will
# then run dia to produce the diagram and insert it in the documentation. The
# DIA_PATH tag allows you to specify the directory where the dia binary resides.
# If left empty dia is assumed to be found in the default search path.
DIA_PATH =
DIA_PATH =
# If set to YES, the inheritance and collaboration graphs will hide inheritance
# and usage relations if the target is undocumented or is not a class.
......@@ -2098,7 +2099,7 @@ DOT_FONTSIZE = 10
# the path where dot can find it using this tag.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_FONTPATH =
DOT_FONTPATH =
# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
# each documented class showing the direct and indirect inheritance relations.
......@@ -2236,26 +2237,26 @@ INTERACTIVE_SVG = NO
# found. If left blank, it is assumed the dot tool can be found in the path.
# This tag requires that the tag HAVE_DOT is set to YES.
DOT_PATH =
DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the \dotfile
# command).
# This tag requires that the tag HAVE_DOT is set to YES.
DOTFILE_DIRS =
DOTFILE_DIRS =
# The MSCFILE_DIRS tag can be used to specify one or more directories that
# contain msc files that are included in the documentation (see the \mscfile
# command).
MSCFILE_DIRS =
MSCFILE_DIRS =
# The DIAFILE_DIRS tag can be used to specify one or more directories that
# contain dia files that are included in the documentation (see the \diafile
# command).
DIAFILE_DIRS =
DIAFILE_DIRS =
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
# that will be shown in the graph. If the number of nodes in a graph becomes
......
......@@ -59,8 +59,7 @@
\tableofcontents
\chapter*{Introduction}
\addcontentsline{toc}{chapter}{Introduction}
\chapter{Introduction}
\par Il y a longtemps, au début des années 2000, l'Association des Étudiants a mis en place un site internet qui n'a eu de
cesse d'évoluer au fil des ans. Grâce aux différents contributeurs qui s'y sont plongés, et qui ont pu y ajouter leurs
fonctionnalités plus ou moins utiles, le site possède désormais un ensemble de fonctionnalité impressionnant.
......@@ -71,6 +70,10 @@ maintenir à l'heure actuelle, et le besoin d'une refonte s'imposait de plus en
\par Le choix de technologies récentes, maintenues, et éprouvée a donc été fait, et le développement a pu commencer dès
Novembre 2015, avec l'objectif d'une mise en production dans l'été 2016, au moins dans une version incluant
l'intégralité des fonctions liées à l'argent, qui sont les plus critiques.
\par Soutenant les projets libres, j'ai décidé de placer le projet sous licence MIT, assurant ainsi une pérénité aux
source. Si quelqu'un dans le futur souhaite le relicencier sous GPL ou autre, cela reste possible, mais je n'impose au
départ que très peu de restrictions \footnote{La seule condition en réalité, est de toujours garder à sa place une copie
de la licence originale, à savoir le fichier LICENSE à la racine du site.} .
\chapter{Les technologies}
\label{cha:les_technologies}
......@@ -480,99 +483,223 @@ comptoirs et des produits, ainsi que des données de comptabilité.
\par L'application \emph{Core} est de loin la plus importante de toutes. C'est elle qui gère les utilisateurs ainsi que
leurs droits. Le CMS y est aussi définit pour tout ce qui est pages de Wiki, pages statiques, ou l'ajout du filtre
\verb#markdown# pour les templates.
\subsection{Liste des modèles}
\label{sub:liste_des_mod_les}
\begin{itemize}
\item \textbf{Group} \\
Ce modèle se subdivise en deux: RealGroup et MetaGroup, décrivant respectivement un vrai groupe géré à la main
dans la liste des groupes, et un meta-groupe, géré automatiquement, en général par les clubs, ou bien par les
cotisations.
\item \textbf{User} \\
Le modèle des utilisateurs, qui est ensuite décliné ou référencé dans beaucoup d'applications pour les
utilisations spécifiques. C'est toutefois ici que sont déclarés les fonctions de gestion des droits des
utilisateurs, afin de pouvoir les utiliser partout ailleurs.
\item \textbf{AnonymousUser} \\
Cette classe n'est pas un modèle stocké en base, puisqu'elle sert à instancier la variable \verb#user#
lorsqu'aucun utilisateur n'est connecté au site.
\item \textbf{Page} \\
Décrit une entité page, servant dans le Wiki ou pour les pages statiques du site. Cette classe s'occupe des
méta-données de la page, comme ses droits, mais son contenu est en réalité stocké dans un objet \verb#PageRev#.
\item \textbf{PageRev} \\
Décrit une révision de page. Utiliser une autre classe avec une \verb#ForeignKey# permet de gérer facilement un
historique des révisions.
\end{itemize}
\subsection{La gestion des droits}
\label{sub:la_gestion_des_droits}
\par La gestion des droits est implémentée de manière globale dans l'application Core.
\par On trouve en effet dans \verb#views/__init__.py# un certain nombre de mixins \footnote{Un mixin est, en
\emph{Django}, un terme désignant une classe abstraite qui ne peut pas servir de parente seule. Elle permet de
surcharger certaines méthodes d'une autre classe abstraite afin de l'adapter à un comportement plus spécifique, mais
reste totalement inutile quand elle est seule. La gestion des droits est un bon exemple puisqu'elle ne s'occupe pas
vraiment de traitement des données comme les autres vues le ferait, elle permet simplement d'ajouter une condition à une
autre classe où cette dernière renverrait un \emph{403 Forbidden} } s'occupant de cela, en se basant sur
un modèle général permettant de rendre compatible rapidement n'importe quel modèle que l'on voudrait protéger. Il suffit
alors de déclarer dans la classe une certain nombre de méthodes et/ou d'attributs, le reste étant simplement déjà pris
en charge par les mixins suivants:
\begin{itemize}
\item \textbf{CanCreateMixin} \\
Cette classe est à mettre en parente d'une classe héritant de \verb#CreateView#, afin d'empêcher quelqu'un
n'ayant pas les droits de créer un objet.\\
Méthode correspondante à créer dans les modèles: \\
\verb#def can_be_created_by(user):# \\
(Attention, ce n'est pas une méthode prenant \verb#self# en premier paramètre!)
\item \textbf{CanEditPropMixin} \\
Cette classe protège l'objet pour l'édition avancée. Par exemple: éditer les droits sur une page, ou éditer les
droits accordé à un utilisateur. \\
Attribut correspondant à créer dans les modèles: \\
\verb#owner_group = models.ForeignKey(Group, # \\
\verb# related_name="owned_user", default=settings.SITH_GROUPS['root']['id'])# \\
Méthode correspondante à créer dans les modèles: \\
\verb#def is_owned_by(self, user):# \\
\item \textbf{CanEditMixin} \\
Cette classe protège l'objet pour l'édition non avancée. Par exemple: éditer une page, ou éditer le profil d'un
utilisateur. \\
Attribut correspondant à créer dans les modèles: \\
\verb#edit_groups = models.ManyToManyField(Group, # \\
\verb# related_name="editable_user", blank=True)# \\
Méthode correspondante à créer dans les modèles: \\
\verb#def can_be_edited_by(self, user):# \\
\item \textbf{CanEditPropMixin} \\
Cette classe protège l'objet pour la vue. Par exemple: consulter une page, ou voir le profil d'un utilisateur. \\
Attribut correspondant à créer dans les modèles: \\
\verb#view_groups = models.ManyToManyField(Group, # \\
\verb# related_name="viewable_user", blank=True)# \\
Méthode correspondante à créer dans les modèles: \\
\verb#def can_be_viewed_by(self, user):# \\
\end{itemize}
\par Pour savoir si l'on doit implémenter les méthodes, les attributs, ou les deux, il faut simplement se poser la
question de savoir si l'objet en question requiert une gestion des droits à l'échelle de la classe ou à l'échelle de
l'objet, et si cette gestion peut être calculé par de la logique.
\par Si on a besoin d'une gestion pour la classe, ou si du code peut être implémenter pour déterminer qui peut avoir tel
droit, alors la méthode suffira. Mais si on a besoin d'une gestion au niveau de l'objet, alors il faudra certainement
recourir aux attributs.
\par Exemples:
\begin{itemize}
\item Les comptes en banques sont gérés uniquement par les personnes faisant partie du groupe \verb#admin-compta#.
Ils ont donc tous les même droits, c'est une gestion au niveau de la classe, donc les méthodes suffisent.
\item Les classeurs de comptabilité sont gérés par les trésoriers des clubs, ils n'ont pas tous les même droits,
mais cela peut tout de même se calculer en fonction des postes dans les clubs correspondants. On a donc besoin
des méthodes uniquement.
\item Les pages n'appartiennent pas forcément à un club, ni à une quelconque entité, mais ont tout de même besoin de
gestion des droits au niveau de l'objet. L'ajout des attributs est donc nécessaire pour pouvoir gérer cela au
cas par cas.
\end{itemize}
\section{Subscription}
\label{sec:subscription}
\subsection{Résumé}
\label{sub:r_sum_}
\par Cette application étend le modèle \verb#User# pour y ajouter le support des cotisations. Elle fournit également les
interfaces de cotisation.
\subsection{Liste des modèles}
\label{sub:liste_des_mod_les}
\begin{itemize}
\item \textbf{Subscriber} \\
Un modèle proxy de \verb#User# fournissant les méthodes pour rapidement savoir si l'utilisateur est cotisant ou
non.
\item \textbf{Subscription} \\
Un modèle cotisation, pour stocker ces dernières. Cette classe fait automatiquement les calculs de début et de
fin de cotisation en fonction de la date du jour, du type de cotisation, et de la durée en semestre de
cotisation.
\end{itemize}
\section{Accounting}
\label{sec:accounting}
\subsection{Résumé}
\label{sub:r_sum_}
\par Cette application sert à gérer à la comptabilité. Elle est architecturée de façon hiérarchique, avec en haut, les
comptes bancaires réels, qui contiennent eux des comptes de clubs, permettant de les diviser en plusieurs petits comptes
en interne, et enfin les classeurs de trésorerie, propres à chaque compte club, permettant de faire les comptes en
triant par semestre.
\par De plus, cette application définit un nouveau type de champ dans la base de donnée: le champ \verb#CurrencyField#,
permettant de stocker de valeurs monétaires.
\subsection{Liste des modèles}
\label{sub:liste_des_mod_les}
\begin{itemize}
\item \textbf{BankAccount} \\
Le modèle des comptes bancaires.
\item \textbf{ClubAccount} \\
Le modèle des comptes clubs.
\item \textbf{GeneralJournal} \\
Le modèle des classeurs de comptabilité, généralement semestriels, mais ils peuvent toutefois fonctionner en